新聞中心
NEWS CENTER
聯系我們
CONTACTS US
濟南皓暉建材有限公司，總部位于中國泉城——山東濟南，是一家專業生產銷售石塑電梯門套，仿大理石電梯門套的專業廠家。皓暉建材在電梯門套生產行業很多年，憑著優質的產品質量和完善的售后服務，在全國各地都有我們的工程案例。
我們本著“以質量求生存 ，靠管理出效益，憑信譽贏口碑,以實干筑輝煌”的經營理念，公司將立足于當代建材現代化發展前沿，依靠科技、勇于探索，以優質產品優良服務、信譽與廣大用戶攜手共創輝煌。
聯系電話： 15853163650
工廠地址：山東濟南章丘區（歡迎廣大客戶來廠勘察）
行業新聞
COMPANY NEWS
德州電梯門套線廠家
2018-07-16 11:42:15 文章來源：www.cz1z.com
德州電梯門套線廠家今日要和我們解說的是電梯門套的裝置步驟是什么，你看到這篇文章，就是你的僥幸。dtmtx1689
Dezhou elevator door line manufacturer today is going to explain to us what the steps of the elevator door installation are. You see this article is your fluke.
1、在墻面上覆上一面層,常用的是3MM的三合板,木匠板,好點是防火石塑線條。用氣釘把它們釘在墻面上,并用沙紙將板面清潔潔凈。
1, on the wall to cover a layer, commonly used is 3MM's three ply board, carpenter board, the good point is fireproof stone and plastic line. Nail them on the wall with air nails and clean the boards with sandpaper.
2、鋸板,將UV高光裝飾板按實踐要求鋸成一塊塊的。
3、倒邊,即將裝置的UV板四邊用倒邊機倒成45度角。依據實踐裝置要求,有的只需倒上下兩頭或是三個邊。
4、清潔電梯門套的反面,用沙紙和抹布將UV板反面清潔潔凈。
5、把萬能膠或木匠膠均勻涂在UV板反面,然后將UV板平整地貼在墻面上,再用手悄悄錘打UV板,讓UV板愈加牢固粘在墻面上。
5, a carpenter or carpenter glue evenly coated on the back of the UV board, and then the UV board flat on the wall, and then quietly hammered UV board hand, so that the UV board more firmly adhered to the wall.
6、調水性填縫料,然后將填縫料填在兩張UV板45度角相交處,先填滿,再用木板垂直角從45度角相交處悄悄劃過,這樣相交處就美觀了。
6, water adjustment filling material, and then fill the filling in the two UV plate 45 degree angle intersection, first fill, then the board vertical angle from 45 degrees angle cross section quietly, so the intersection is beautiful.
7、清潔電梯套的外表,將剩余的填縫料清潔潔凈。
7. Clean the appearance of the elevator sleeve and clean the remaining sealants.
