野花香高清在线观看视频播放免费,国产aⅤ无码专区亚洲av,色偷偷色嚕噜狠狠网站,人人妻人人澡人人爽欧美精品

仿大理石uv板正確的施工方法是：
The correct construction method of imitation marble UV plate is:
一、結構膠粘貼法：
Structure adhesive paste method:
1、墻面預處理：先刮干凈墻面的膩子粉，去處墻面的粉塵顆粒，保證后期結構膠的有效粘貼。
1, metope pretreatment: first clean the wall putty powder, place the wall dust particles, guarantee the later structure glue effective paste.
2、墻面填平：將墻面中有凹陷處填入發泡膠，使之處于一個平面，如果墻面是異形或者沒辦法平整，可以直接打上復合板或者三合板。
2, the wall filled with depression: the walls in styrofoam, which is in a plane, if the wall is shaped or not smooth, can be directly hit the composite plate or three ply.

3、結構膠點沾：按照規格裁剪好仿大理石UV裝飾板材，用結構膠均勻涂抹在板材的背面。
3, structural adhesive point: in accordance with specifications to cut good imitation marble UV decorative sheet, with structural adhesive evenly coated on the back of the plate.
4、安裝：按照裝修風格將涂抹好結構膠的板材按壓在墻面上。并保證受力均勻、持續。
4, installation: in accordance with the decoration style, will be coated with structural adhesive board pressed on the wall. And ensure uniform and sustained force.
二、鋁合金固定：
Two 、 aluminum alloy fixation:
1、墻面基層：先在墻面打上一面基層，三合板或者木工板都行，好點是防火玻鎂板，用氣盯把它們釘在墻面上。
1, metope base: first on the wall to play a grass-roots, three plywood or carpentry board will do, the good point is fire-resistant glass magnesium plate, with gas stare, nail them on the wall.
2、陰陽角裝飾線條的安裝：先在墻面上釘上腳線，用鋁合金陰角固定在墻角，再用鋁合金工具條固定墻角，也就是分別把鋁合金陰角和鋁合金工具條分別用釘子釘在墻面的相應位置。
2, yin and yang angle decorative line installation: first in the wall nail on the foot line, with Aluminum Alloy Yin angle is fixed in the corner, and then Aluminum Alloy tool fixed corner, is the Aluminum Alloy Yin angle and Aluminum Alloy tools were used in the corresponding position of the wall of the nail.
3、裁剪板材：按照規格裁鋸仿大理石UV裝飾板材，將UV板按實際要求尺寸鋸成規定尺寸，再將鋸邊用砂紙修整平整和干凈。
3, cutting plate: in accordance with specifications cut saw, imitation marble UV decorative sheet, the UV board according to the actual requirements size sawing into the specified size, and then saw edge with sandpaper trim, smooth and clean.
4、再將UV板嵌入鋁合金陰角和工具條之間就行了。
4, then insert the UV board between the aluminum alloy, the negative angle and the tool bar.
5、如果為了更牢固也可以現在裝飾板材背面涂上結構膠在嵌入鋁合金陰角就行。
5, if in order to be more solid, you can now decorate the back of the plate coated with structural adhesive, embedded in the aluminum alloy Yin Kok on the line.
您如果對我們的產品感興趣或者有任何的疑問，您可以直接給我們留言或直接與我們聯絡，我們將在收到您的信息后，會第一時間及時與您聯絡。
If you are interested in our products or have any questions, you can either leave us a message or contact us directly. We will contact you in the first time after receiving your information.